Lenovo is a large multinational enterprise that implements diversified development in the information industry. Lenovo is mainly engaged in the production of computers. Leading industries. Lenovo Computer has a history of more than 30 years since its establishment. Just a year or three ago, Lenovo Computer sales ranked first in the world. This is a very historic moment and an affirmation of Lenovo computers. So what we are going to talk about today is how to disassemble the Lenovo v580 computer. The editor will bring you detailed tutorials below.

Tools:

In addition to a screwdriver, you also need an old bank card.

Steps:

1. First remove the battery, at least some details. The workmanship of the battery compartment of the V580 is indeed a bit rough, but fortunately it does not affect its use. The battery is from Sanyo, 48800 mAh, nominal 47520 mAh, the standby time has not been tested.

2. After removing the battery, wait five to ten minutes before taking off the cover on the bottom case. When removing, just remove the two screws on the upper side and push the cover down. , very convenient. The cover is made of plastic. Although the texture is relatively hard, it still has a certain impact on heat dissipation and heat transfer.

3. There is a hard drive in the middle. Remove the screws and push out the hard drive box. The V580's hard drive is a Hitachi 1TB hard drive, 5400 rpm, 8MB cache. The noise is not high, but there is a sizzling sound when reading and writing data, which is more obvious when the environment is quiet.

　4. When removing the memory module, just move the steel plates on both sides of the memory module outward, and the memory module will naturally tilt up. When removing it, try not to touch the gold finger of the memory. Will be hard when fixedThe disk is inserted obliquely into a slot, and only one screw is needed, which is installed in the red circle in the upper left corner of the hard disk to fix the hard disk. Generally speaking, the installation is relatively convenient. There are also rumors that V580 only supports 16G solid-state drives, but it has not been confirmed yet. 128G can be used normally.

5. Finally, there is the wireless network card, located at the bottom, between the solid-state drive and memory compartments. When disassembling, you only need to pull it out from the PCIE slot, no further removal is required.

6. Next, remove the optical drive. The disassembly process is relatively simple: just remove the screws in the red circle, and then push the optical drive outward. Be careful not to pull, as it can easily damage the optical drive.

7. Disassemble the keyboard. First insert the bank card into the gap on the left side of the keyboard and slide it in the direction of the arrow; then insert it into the gap above the keyboard, slide from left to right, and slide to the bottom. After that, the keyboard will naturally release. There are cables on the back of the keyboard, so be careful when lifting the keyboard.

8. Remove the C shell. Specifically, insert the bank card into the gap on the right side of the notebook, follow the direction of the arrow, and cut open the connection between the C shell and the D shell along the edge of the notebook shell. It can separate the hidden buttons on both sides and front. During this process, do not insert the bank card too deep. In addition, if there is a concealed buckle that cannot be opened, you should observe the direction in which the concealed buckle is fastened, and push the shell in the opposite direction to separate it naturally. Never remove it by force.

The above is a detailed explanation of the disassembly steps of Lenovo v580. Have you all learned it? In fact, the editor does not recommend that you disassemble it easily by yourself. After all, the value of the computer and other Digital products are different, they are still relatively expensive. Moreover, the internal components of a computer are much more complex than other digital products, and an accident may cause the computer to become unrecoverable. Therefore, everyone must be careful when disassembling the computer. After disassembling the computer parts, keep them properly to prevent loss.