How to disassemble Lenovo y460p Lenovo y460p disassembly tutorial

Now in cities, almost every household has a computer, and most people know more and more about computers. This makes the computer market in our country very hot. Lenovo Computer is one of the brands in the computer market. A brand of computer that is widely popular among everyone. However, when using a computer, you will inevitably encounter various problems about the computer, especially the hardware problems that must be disassembled. So, what should you do? Today I will tell you Let’s talk about the Lenovo y460p disassembly tutorial.

1. Tools required for disassembly:

You need a screw set and a pry plate. In this way, you can start disassembling the machine.

2. Specific process:

1. To disassemble this computer, the most important thing is to have a set of screws, because unlike desktop computers, a screwdriver can That's it. First, push the latches on both sides of the computer battery and take out the battery. After taking out the battery, you can see four screws. These four screws are used as the baffle of the notebook. Remove the baffle and take out the hard drive.

2. Then you will see the fan. There are two wires next to the fan. These two wires are difficult to pull out, so be careful when pulling them out. Also, the fan also has three screws, so you should also pay attention to this.

3. Next, we have to dismantle the heat sink module. This part is more critical and must be handled carefully.

4. There are screws and wires at both ends of the wireless network card. You need to remove the screws and then remove the two wires to remove this.

5. There is only one screw for the optical drive. After being removed, the optical drive can be pulled out. After pulling out the optical drive, there will be two screws, which are used to remove the large bezel. Remove the invisible screws. Make sure to remove all the screwsAfter that, you will see a piece of tin foil. Open it and push the keyboard loose. The next step is to disassemble the keyboard.

6. After the keyboard is opened, first unplug the cable and gently pull back the two small cables inside. After unplugging all the surrounding screws, pry open the C case.

7. In this way, the entire computer has been disassembled.

Use of car maintenance reminder stickers:

1. Writing

You can use a ballpoint pen to write the mileage, or When writing with a marker (oil-based pen), avoid writing with a water-based pen. Writing with a water-based pen is easy to erase.

2. Cleaning

Use a clean wet towel to wipe the location where the maintenance reminder sticker will be posted on the front windshield of the car (there should be no dust, let alone oil stains. It is recommended to use a clean Wipe with a damp towel to ensure that the electrostatic patch can be firmly attached).

3. Stick it on

Peel off the car maintenance reminder sticker from the protective backing paper of the electrostatic sticker, stick it to the newly wiped front windshield and press it gently. Can. (Don’t always take it off. If you take it off and put it back on again, be sure to wipe the glass with a clean wet towel first)!

Notes:

1. The electrostatic film is a glue-free material, so it is not suitable for sticking outdoors or outside the car. If you need to stick it to the outside environment of the car for a long time, please use this material with caution.

 2. The electrostatic film is suitable for affixing to indoor ceramic tiles, cabinets, glass doors, windows, mirrors, refrigerators, car glass, water cups and other smooth surface materials.

3. Annual inspection label electrostatic stickers, car maintenance reminder stickers and other electrostatic sticker products can be posted repeatedly, but you must ensure that when you take them off and put them back on, the glass surface is clean, preferably Wipe the glass with a clean wet rag and then stick it on again. This will keep it firmly attached, otherwise, it may fall off midway.

4. Please do not use or place it near open flames.

5. Do not put the printing surface (i.e. the side with printed content) in direct contact with the carrier surface.

After the editor’s detailed explanation of the Lenovo y460p disassembly tutorial, do you already know how to disassemble the Lenovo y460p? Now that you have a certain understanding of it, isn’t it that difficult? Lenovo y460p is a very useful computer with very good configuration. Among similar products, this computer is also very cost-effective. You can consider it when buying a computer. I hope that my article can be useful to everyone. When you need to do simple disassembly in the future, you can try to do it yourself, which saves you the trouble of going out and a lot of money.