Remote connection not established: 3 helpful solutions

Have you recently encountered a remote connection not established error? If yes, then this article from MiniTool is the right place for you. We will discuss several useful solutions to help you solve your problem.

Remote connection not established

Most of you should know that Internet activity is monitored by advertisers, governments, and even cybercriminals. Therefore, to protect your privacy, Virtual Private Networks (VPNs) are gradually gaining importance. However, people reported an error that the remote connection was not established, which prevented them from using the VPN connection.

There are several error messages related to this issue, listed below:

  • The remote connection was not established because the name of the remote access server was not resolved.
  • The remote connection was not established because the Windows 10 VPN tunnel failed.
  • Remote connection refused.
  • The remote connection timed out.

Although there are various error messages, the causes are similar and include VPN server, system connection issues, antivirus software, etc. If you receive an error message similar to the above, please continue reading and try the solutions described.

Tip:

If your network connection is running at a slow speed, you can try MiniTool System Booster to speed up the internet easily. This comprehensive PC optimization software can also disable unnecessary startup programs, clear junk files, and fix PC problems to improve PC performance.

How to fix remote connection being commented

Fix 1. Refresh DNS and reset Winsock

You may receive a "Remote connection not established" error due to improper network configuration or DNS corruption. In this case, you can use the command prompt to follow the steps below to refresh DNS and reset Winsock.

Step 1. Type cmd in the Windows search box and press Shift Ctrl Enter to run Command Prompt as administrator.

Step 2. Type the following command lines and press Enter.

  • ipconfig /flushdns
  • ipconfig /registerdns
  • ipconfig /release
  • ipconfig /renew
  • netsh Winsock Reset

Then, reconnect your VPN to see if the issue is resolved. If not, continue to the next solution.

Fix 2. Restart the Remote Access Connection Manager service

Remote Access Connection Manager manages network connections between computers and VPNs or other remote devices. If this service is not enabled or set up correctly, other related services will not start, possibly causing this error.

Step 1. Type Command Prompt in the Windows search bar and right-click the best matching option to select Run as administrator.

Step 2. Type the next two lines of command and press Enter respectively.

  • net stop RasMan
  • net start RasMan

Alternatively, you can open the Services window on your computer, then find and double-click the Remote Access Connection Manager service from the list. Then, select Stop in the Service Status section and click Apply>; OK to save the changes. After waiting a few minutes, you should open the Properties window again, change the service status to Start and click Apply>. Okay.

Fix 3. Temporarily disable Windows Defender Firewall

Windows Firewall will block suspicious and unsafe networks to protect your computer from attacks. But sometimes, it may mistakenly block the connection between your computer and the VPN, causing an error that the remote connection cannot be established. Temporarily disable Windows Firewall to see if the problem is resolved.

Step 1. Type Windows Defender Firewall in the Windows search bar and press Enter to open it.

Step 2. Select the Turn Windows Defender Firewall on or off option in the left pane.

Step 3. In the following window, you need to turn off Windows Defender Firewall (not recommended) in the Private Network Settings and Public Network Settings > sections.

<p style="text-align:center;">

Step 4. Click

OK to save changes.

Afterwards, reconnect your VPN. If the error is resolved, you should add the VPN's server as an exception for inbound and outbound connections in Windows Defender Firewall.

Also, you can try using a new DNS or try another VPN, such as MiniTool VPN, to resolve this "remote connection not established" error.

Final words

The remote connection not established error is not an uncommon problem. If you are troubled by this issue, try the solutions given in this article. Hope one of them solves your problem.

These are the details of Remote Connection Not Established: 3 Useful Solutions. For more information, please pay attention to other related articles on the PHP Chinese website!

Source: minitool.com